Anchor for install. without thermal bridge M12/M16

High load-bearing spacer mounting system with thermal bridge breaking on insulated and non-insulated surfaces.
Simple and quick installation.
An element with a reduced thermal bridge for connecting and transferring the load from the attached part to the base.
The adapter for breaking the thermal bridge in the plastic cone breaks the thermal bridge and prevents heat loss to the outside.
Secure connection with approval for heavy loads in a wide range of building materials.
Individual and flexible length adjustment using an adapter with commercially available threaded rods.

Area of use
Fastening with low heat losses to insulated substrates in interiors and exteriors, in walls, frontal insulation on ceilings, non-load-bearing facades e.g. awnings, canopies, mailboxes, satellite systems, lighting equipment, skylights, air conditioning units, consoles, gratings, metal structures, balcony railings, balcony screens, etc.
Can be used in various building materials
Solid and hollow lime-sand brick, normal and light concrete, cracked and uncracked concrete., aerated concrete, solid and vertically perforated brick
Can be used outdoors, in wet areas and near the sea
External stainless steel parts.
Suitable for pin installation

Connection thread - M12
Material of the connecting thread - Stainless steel A4
Threaded rod diameter - M16
Length - 80mm